< Previous
|
Contents
|
Next >
F - CHASSIS AND STRUCTURAL
F.1 Definitions
F.1.1 Chassis
F.1.2 Frame Member
F.1.3 Monocoque
F.1.4 Main Hoop
F.1.5 Front Hoop
F.1.6 Roll Hoop(s)
F.1.7 Roll Hoop Bracing Supports
F.1.8 Front Bulkhead
F.1.9 Impact Attenuator
F.1.10 Primary Structure
F.1.11 Primary Structure Envelope
F.1.12 Major Structure
F.1.13 Rollover Protection Envelope
F.1.14 Tire Surface Envelope
F.1.15 Component Envelope
F.1.16 Buckling Modulus (EI)
F.1.17 Triangulation
F.1.18 Nonflammable Material
F.2 Documentation
F.2.1 Structural Equivalency Spreadsheet - SES
F.2.2 Structural Documentation
F.2.3 Equivalence
F.2.4 Fabrication
F.3 Tubing and Material
F.3.1 Dimensions and Tolerance
F.3.2 Tubing Requirements
F.3.3 Non Structural Tubing
F.3.4 Steel Tubing and Material
F.3.5 Alternative Tubing Materials
F.4 Composite and Other Materials
F.4.1 Requirements
F.4.2 Quasi-Isotropic Layup
F.4.3 Laminate Testing
F.4.4 Buckling Modulus – Equivalent Flat Panel Calculation
F.5 Chassis Requirements
F.5.1 Primary Structure
F.5.2 Bent Tubes or Multiple Tubes
F.5.3 Holes in Tubing
F.5.4 Fasteners in Primary Structure
F.5.5 Roll Hoops
F.5.6 Front Hoop
F.5.7 Main Hoop
F.5.8 Main Hoop Bracing
F.5.9 External Items
F.5.10 Mechanically Attached Roll Hoop Bracing
F.5.11 Other Bracing Requirements
F.5.12 Other Side Tube Requirements
F.5.13 Component Protection
F.6 Tube Frames
F.6.1 Front Bulkhead
F.6.2 Front Bulkhead Support
F.6.3 Front Hoop Bracing
F.6.4 Side Impact Structure
F.6.5 Shoulder Harness Mounting
F.6.6 Main Hoop Bracing Supports
F.7 Monocoque
F.7.1 General Requirements
F.7.2 Composite Monocoques
F.7.3 Front Bulkhead
F.7.4 Front Bulkhead Support
F.7.5 Front Hoop Attachment
F.7.6 Side Impact Structure
F.7.7 Main Hoop Attachment
F.7.8 Roll Hoop Bracing Attachment
F.7.9 Attachments
F.7.10 Driver Harness Attachment
F.8 Front Chassis Protection
F.8.1 Requirements
F.8.2 Anti Intrusion Plate - AIP
F.8.3 Composite Anti Intrusion Plate
F.8.4 Impact Attenuator - IA
F.8.5 Impact Attenuator Attachment
F.8.6 Non Crushable Objects
F.8.7 Impact Attenuator Data - IAD
F.9 Fuel System (IC Only)
F.9.1 Location
F.9.2 Protection
F.10 Accumulator Container (EV Only)
F.10.1 General Requirements
F.10.2 Design
F.10.3 Attachment
F.11 Tractive System (EV Only)
F.11.1 Location
F.11.2 Protection
< Previous
|
Contents
|
Next >