< Previous | Contents | Next >
F.6.5.1 The Shoulder Harness Mounting Bar must:
a. Be a single piece of uncut, continuous, closed section steel tubing that meets F.3.2.1.k
b. Attach to the Main Hoop on both sides of the chassis
F.6.5.2 Bent Shoulder Harness Mounting Bars must: a. Meet F.5.2.1 and F.5.2.2
b. Have bracing members attached at the bend(s) and to the Main Hoop.
Material for this Shoulder Harness Mounting Bar Bracing must meet F.3.2.1.l
The included angle in side view between the Shoulder Harness Bar and the braces must be no less than 30°.