< Previous | Contents | Next >

IN - TECHNICAL INSPECTION

The objective of Technical Inspection is to determine if the vehicle meets the Formula SAE Rules requirements and restrictions and if, considered as a whole, it satisfies the intent of the Rules.


 

IN.1 Inspection RequirementsIN.1.1 Inspection RequiredIN.1.2 MeasurementIN.1.3 Team ResponsibilityIN.1.4 Technical Inspection ProcedureIN.1.5 Technical Inspection AuthorityIN.1.6 Inspection ConditionIN.1.7 Visible AccessIN.1.8 Marked ItemsIN.1.9 CorrectionIN.1.10 ReinspectionIN.2 Inspection ProcessIN.3 Initial InspectionIN.4 Electrical Technical Inspection (EV Only)IN.4.1 Inspection ItemsIN.4.2 Accumulator InspectionIN.4.3 Accumulator AccessIN.4.4 Insulation Monitoring Device TestIN.4.5 Insulation Measurement TestIN.4.6 Ready to Drive SoundIN.4.7 Electrical Inspection CompletionIN.5 Driver Cockpit ChecksIN.5.1 Driver ClearanceIN.5.2 Egress TestIN.5.3 Driver Clearance and Egress Test CompletionIN.6 Driver Template InspectionsIN.6.1 ConductIN.6.2 Driver Template Clearance CriteriaIN.7 Cockpit Template InspectionsIN.7.1 ConductIN.7.2 Cockpit Template CriteriaIN.8 Mechanical Technical InspectionIN.8.1 Inspection ItemsIN.8.2 Aerodynamic Devices Stability and StrengthIN.8.3 Monocoque InspectionsIN.8.4 Engine Inspection (IC Only)IN.8.5 Mechanical Inspection CompletionIN.9 Tilt TestIN.9.1 Tilt Test RequirementsIN.9.2 Tilt Test CriteriaIN.9.3 Tilt Test CompletionIN.10 Noise and Switch Test (IC Only)IN.10.1 Sound Level MeasurementIN.10.2 Special ConfigurationsIN.10.3 Industrial EngineIN.10.4 Test SpeedsIN.10.5 Maximum Permitted Sound LevelIN.10.6 Noise Level RetestingIN.10.7 Switch FunctionIN.10.8 Noise Test CompletionIN.11 Rain Test (EV Only)IN.11.1 Rain Test RequirementsIN.11.2 Rain Test ConductIN.11.3 Rain Test CompletionIN.12 Brake TestIN.12.1 ObjectiveIN.12.2 Brake Test Conduct (IC Only)IN.12.3 Brake Test Conduct (EV Only)IN.13 Inspection ApprovalIN.13.1 Inspection ApprovalIN.13.2 Inspection StickerIN.13.3 Inspection ValidityIN.14 Modifications and RepairsIN.14.1 Prior to Inspection ApprovalIN.14.2 After Inspection ApprovalIN.14.3 Repairs or Changes After Inspection ApprovalIN.15 ReinspectionIN.15.1 RequirementIN.15.2 ConductIN.15.3 Result