< Previous | Contents | Next >
T.7.6.1 Any part of any Aerodynamic Device that is located:
a. Rearward of the Head Restraint Plane must be no higher than 1200 mm above the ground.
b. Forward of the Head Restraint Plane must be no higher than 500 mm above the ground.
c. Forward of the centerline of the front wheel axles and Outboard of two vertical planes parallel to the centerline of the chassis touching the inside of the front tires at the height of the hubs must be no higher than 250 mm above the ground
T.7.6.2 Bodywork height is not restricted when the Bodywork is located:
Between the transverse vertical planes positioned at the front and rear axle centerlines
Inside two vertical fore and aft planes 400 mm outboard from the centerline on each side of the vehicle