< Previous | Contents | Next >
T.2.6.1 From the driver’s shoulders rearwards to the mounting point or structural guide, the Shoulder Belt Side View Angle must be between 10° above the horizontal and 20° below the horizontal. Refer to figure following T.2.5.7 above
T.2.6.2 The Shoulder Belt Mount Spacing must be between 178 mm and 229 mm. Refer to figures in
T.2.6.3 Any bolt used to attach a Shoulder Belt, directly to the chassis or to an intermediate bracket, is a Critical Fasteners, see T.8.2, with a minimum diameter that is the smaller of:
The bolt diameter specified by the manufacturer
10 mm or 3/8”